Call us on +49 (0)5651 22 96 400|anfrage@fernco.de

Compact Seal CS

Compact Seal CS

The Fernco compact seals can be used universally in civil engineering for the areas of electricity, gas and water distribution. By tightening the nuts, the metal plates are pressed against the rubber sealing ring. This causes the elastomer ring to expand evenly in all directions and reliably seals the pipeline. In addition, these sealing inserts serve for guidance and acoustic decoupling.

  • Tight against pressing water and gases (in EPDM)
  • Tight against aggressive media (oil and petrol resistant – NBR on request)
  • Use in sound insulation according to DIN 4190
  • No special tools required – quick, safe and easy installation
  • radon proof

    SKU: ring-seals Category:

    Compact Seal CS 3 & 5 bar

    The Fernco compact seals are universally applicable for civil engineering, gas and water distribution. They are suitable for the sealing of pipes and core holes of all diameters and can be installed in a feed pipe as well as directly in a coring drill hole. By tightening the nuts, the metal plates are pressed against the rubber sealing ring. As a result, the elastomer ring expands uniformly on all sides and reliably seals the pipe. In addition, these density inserts serve for guiding and acoustic decoupling.

    The Fernco CS compact seals are available in two versions:

    • CS 3 bar: Ring-Seal single-layered, 30 mm (pressure-tight up to 3 bar)
    • CS 5 bar: Ring-Seal double layered, 60 mm (pressure-tight up to 5 bar)

    CS 3 bar

    CS 5 bar

    Product Benefits:

    • Rings and connecting elements made of stainless steel V2A / V4A
    • Against pressing water (in EPDM)
    • Seals against aggressive media (in NBR)
    • For use in drinking water systems (as KTW version)
    • Particularly suitable for thin-walled and corrugated pipes (As Hybrid version)
    • Use in sound insulation according to DIN 4190

    Compact Seal CSU

    The Fernco compact seal CSU insert can be used as a wall duct.

    By simply cutting out the pre-punched rubber rings, the press ring seal can be adapted on site to the present media pipe outer diameter.

    Compression ring inserts do not assume any support bearing function and serve exclusively for the pressure-tight, elastic sealing of cables. Slightly axial movements of the media pipes are permissible.

    Product Benefits:

    • Tight against water and gases
    • Available in dimensions DN 100, DN 125, DN 150 and DN 200
    • Various versions also available in split version
    • All steel pieces are made of stainless steel V2A / V4A
    • Density element made of high-quality EPDM, single-layered 30 mm / 40 mm
    • Use in sound insulation according to DIN 4190
    • Cost-effective storage
    Einbau Ringraumdichtung PD ZWR-System, Schritt 1

    Slide the sealing insert over the service pipe and into the annular space from the building side

    Einbau Ringraumdichtung PD ZWR-System, Schritt 2

    Tighten all screws clockwise in several stages until the sealing insert fills the annular space

    Einbau Ringraumdichtung PD ZWR-System, Schritt 3

    Tighten the bolts evenly to the required torque using the torque spanner

    Compact Seal Hybrid CSH

    Compact Seal Senso CSPU

    The medium-hard solid rubber core absorbs the compressive or pressing force and transfers and distributes the medium. The soft cover acts as a seal toward the carrier pipe, the core-drilled hole or the wall sleeve and toward the sides of the pressure fl ange (including the screw threads). The extra soft cover element adapts itself even to extreme carrier pipe surfaces without difficulty.

    Product Benefits:

    • 2-component construction in a fixed connection tight against oppressive water (pressure-tight up to 1.5 bar)
    • excellent chemical, mechanical and thermal properties

    Compact Seal Cavo-In CSSCI

    The Cavo-In press ring sealing insert is a segment ring sealing insert for corrugated plastic pipes.

    Product advantages at a glance:

    • Low screw tightening forces
    • Stable cross-section for PE pipes
    • No time-delayed retightening
    • No special tools required
    • Quick, safe and easy installation
    • Press flanges and connecting element made of V2A stainless steel
    • Sealing insert in 2-component design made of EPDM and thermoset elastomer with excellent chemical, mechanical and thermal properties

    Downloads

    Data Sheet – Compact Seal CS, 3 & 5 bar

    Data Sheet – Compact Seal CSU, ZWR-System

    Installation Guide – Compact Seal CSU, ZWR-System

    Data Sheet – Compact Seal CSH Hybrid

    Data Sheet – Compact Seal Senso CSPU

    Data Sheet – Compact Seal Cavo-In CSSCI

    Related products

    Related sectors

    Title

    Go to Top